Need some help? Call us on 020 3137 7283
Email info@litecentric.com

DMX

  • Lite Centric offer various controls and drivers to connect LED light to DMX systems. These products can be used in night clubs, bars, casinos, entertainment, theater, movie sets and many more projects requiring control of a large number of LED lights.
  • DMX controllers are used to program and control LED Strip & LED Neon.  Used for more technical and complex LED installations.
    • Constant current.
    • Wide range of channels.
    • Dimming and tuning compatible.

 

   

5 Item(s)

Lite 3 Channel DMX Mate PX24500

PRODUCT OVERVIEW

  • Can be used on 12v or 24V DC (Constant Voltage).
  • Fully DMX512 Compatible Connection via cat 5 RJ45 Cable 5 Amp Per Channel 3x5 = 15A total Maximum.
  • Size 18cm L 3.5cm H 4cm W
  • Fully Dip switch enabled to assign channel number.
  • Can also be used with single colour tape and a dimmer control (DM150).
  • Perfect for use with our RGB Led Strip or RGB Blocks.

Lite 3 Channel DMX Constant Voltage PX24500A

PRODUCT OVERVIEW

  • Can be used on 12v or 24V DC (Constant Voltage).
  • Fully DMX512/1990 Digital Signal.
  • Connection via 3 Wire data + Data - GND.
  • 6 Amp Per Channel 3x6 = 18A total maximum.
  • Size 17cm L 22cm H 4cm 5W.
  • Full LED Display  enabled to assign channel number.
  • Can also be used with single colour strip and a dimmer control.
  • Perfect for use with any of our RGB Led Strip or RGB Blocks. 

Lite Single Channel DMX Mate PX24600

PRODUCT OVERVIEW

  • DMX 512 Standard can be linked to other units using standard RJ45 - network cable.
  • Designed to be used with a power supply (12v or 24v)
  • For the dimming of single colour tape only.
  • Can be controlled by our Dial Dimmer DM150 or any home automation controller (eg Lutron) that uses 1 - 10v Dimming
  • Dip Switch for DMX address on the side
  • UL CE and ROHS
  • One year warranty
  • Size 18cm long 4 cm wide 3 cm high

Lite 4 Channel DMX Constant Voltage PX24500D

PRODUCT OVERVIEW

  • New PX Series DMX512 Decoder
  • 4 Channel @ 5A per Channel (RGB & W)
  • Simple Screw Connections
  • Constant Voltage LED Controller
  • 256 graduations of control
  • Led Display to set DMX Address (with power off memory)
  • Size 168mm x 51mm x 22mm
  • Full CE approved

Lite 4 Channel DMX Mate (PX403)

PRODUCT OVERVIEW

  • The PX403 4 channel DMX driver allows you to connect four channels of LED Lighting to DMX512 or DMX1990 Lighting controllers.
  • Use this product to connect your common anode RGB LED lights plus one single color common anode LED light, or four common anode single color LED lights, LED modules, or LED light strips to a DMX512 Control System.
  • For 12 to 24VDC systems only. Includes one 6' Cat5 cable with RJ45 jack connectors.
  • 3A per channel with a maximum power of 144W / 12VDC or 288W / 24VDC.
  • Can be connected to DMX512 signal using RJ45 connectors and Cat5 cables.
  • Unit has DIP switches on the side to manually change the DMX address of each driver.
  • Each PX403 Driver uses 4 DMX addresses.
  • LEDs and power supply are connected using screw down style connectors.
  • RoHs, CE approved.

   

5 Item(s)